COMPARE THE FOUR PACK SIZES
Each carton contains 12 cans. Packaging below shows the carton count × the size of each carton. Weights are totals for the selected pack.
Swipe across to see all specifications →
| Pack | Cases | Cartons × size (L × W × H) | Packed weight, total |
|---|---|---|---|
| 12 cans | 1 | 1 × (13.8 × 9.4 × 14.8 in) | 28.7 lb |
| 24 cans | 2 | 2 × (13.8 × 9.4 × 14.8 in) | 57.3 lb |
| 36 cans | 3 | 3 × (13.8 × 9.4 × 14.8 in) | 86.0 lb |
| 48 cans | 4 | 4 × (13.8 × 9.4 × 14.8 in) | 114.6 lb |
Carton dimensions and weights are approximate. Complete accessories are listed below. Request a wholesale quote.
WHAT’S INCLUDED IN EACH CASE
The listed contents scale with the number of cases. Check the product instructions for any additional equipment or protection your work requires.
| Included item | 12 | 24 | 36 | 48 |
|---|---|---|---|---|
| Foam cans | 12 | 24 | 36 | 48 |
| Applicator gun | 1 | 2 | 3 | 4 |
| Cleaner | 1 | 2 | 3 | 4 |
| Protective coverall | 1 | 2 | 3 | 4 |
| Protective eyewear | 1 | 2 | 3 | 4 |
| Gloves (pairs) | 1 | 2 | 3 | 4 |
| Red nozzle pairs (2 tips per pair) | 6 | 12 | 18 | 24 |
| Individual nozzle tips | 12 | 24 | 36 | 48 |
Some photos and creator videos show an earlier accessory arrangement. Use this current contents list when checking your kit.
Your cans. Your applicator. Your accessories. DealMart brings them together in 12, 24, 36 and 48-can spray foam kits. Every case contains 12 foam cans, one applicator gun, one cleaner, one protective coverall, one pair of protective eyewear, one pair of gloves and six red nozzle pairs (six straight tips and six 45° tips).
Compare the contents above, then choose the number of cases for your purchasing plan. Included accessories do not replace any additional protective equipment required by the product instructions and work setting.
Some photos and creator videos show an earlier accessory arrangement. Use this current contents list when checking your kit.
TWO TIPS. MORE WAYS TO AIM.
CHOOSE YOUR
SPRAY DIRECTION.
Each red nozzle pair gives you a straight tip and a 45° angled tip. Both are attachments for the applicator gun.
6 PAIRS / 12 TIPSPer 12-can case: 6 straight tips + 6 angled tips. Larger packs include the same ratio.
Read the application steps
- Clean the application surface and dampen it as specified in the product instructions.
- Shake the can vigorously for at least 60 seconds.
- Fit the can and applicator gun following the equipment’s connection instructions.
- Choose the straight or angled nozzle for the intended spray direction.
- Spray from a distance of 12–18 inches.
- For suitable ceiling applications, use the angled nozzle and spray at 45°. Apply a thin first coat, wait 30–60 seconds, then apply a second coat.
- The manufacturer-recommended foam thickness is 2 inches. This is not a stated maximum thickness per pass; follow the product instructions for layer application.
Read the safety and protective-equipment requirements before use. The interval between coats is not a full-cure or re-entry time.
Choose the direction for your work, then check product suitability, nozzle fitting, can orientation and the required protection in the exact product instructions. The angled tip does not change the foam’s coverage or establish suitability for every ceiling assembly.
One case at a time
The four packs contain one, two, three or four cases. A larger pack increases the quantities shown in the contents table; it is not a different performance grade or a promise of coverage.
For repeat orders or resale, tell us your expected case quantity.
See what you are choosing
Watch a real 12-can unboxing and close-up application footage in Projects. Use the current contents table to confirm your order; a creator video can show a different presentation or earlier packaging.
Start with the buying guides if you are still comparing product formats.
Delivery, with the details up front
Orders ship from Chino, California. Free standard shipping within the contiguous 48 U.S. states and Washington, DC. For Alaska, Hawaii and U.S. territories, contact customer service for a shipping quote before ordering. Online checkout is unavailable for these destinations. Your delivery address and applicable taxes are confirmed at checkout.
In-stock orders usually dispatch within 3 days. We dispatch Monday through Saturday; no dispatch on Sundays. Transit to eligible mainland addresses normally takes up to 7 days after dispatch, depending on destination and carrier timing. These are estimates, not guaranteed delivery dates. Read the shipping policy.
PLAN YOUR QUANTITY
HOW MUCH FOAM DO I NEED?
Manufacturer-reported yield: 20 board feet per can. At the recommended 2-inch thickness, this equals approximately 10 sq ft per can. Estimate volume as area in sq ft × thickness in inches, divide by 20, then round the can count up.
| Pack | Volume | Estimated area |
|---|---|---|
| 12 cans | 240 board feet | 120 sq ft |
| 24 cans | 480 board feet | 240 sq ft |
| 36 cans | 720 board feet | 360 sq ft |
| 48 cans | 960 board feet | 480 sq ft |
Manufacturer-reported planning figures, confirmed for DealMart. Actual yield varies with application conditions and technique. R-values describe the foam, not a complete wall or roof assembly.
Questions before choosing a kit
How much area does each kit cover?
Using the manufacturer-reported yield of 20 board feet per can, the estimated coverage at 2 inches is 120 sq ft for 12 cans, 240 sq ft for 24 cans, 360 sq ft for 36 cans and 480 sq ft for 48 cans. Actual coverage varies with application conditions and technique.
What R-values does the manufacturer report?
The manufacturer reports R-4.12 at 1 inch, R-8.24 at 2 inches, R-12.36 at 3 inches and R-16.48 at 4 inches. These are foam values; they do not describe the R-value of a complete wall or roof assembly or establish a fire rating. The listed thicknesses are not single-pass application instructions.
How do I measure my walls and ceiling?
For a rectangular room, wall area = 2 × (length + width) × wall height. A flat ceiling adds length × width. Subtract doors and windows that will not be sprayed. A 10 × 20 ft room with 10 ft walls has 600 sq ft of wall area and a 200 sq ft ceiling: 800 sq ft total before subtracting openings. Use the room-area calculator.
How many nozzle pairs come with each pack?
Each 12-can case contains 6 pairs: 6 straight tips and 6 angled tips, for 12 individual tips. The 12, 24, 36 and 48-can packs therefore include 6, 12, 18 and 24 pairs — or 12, 24, 36 and 48 individual tips.
What is the difference between the two red nozzles?
Both fit the applicator gun. The straight tip is for forward-facing spray work. The 45° angled tip directs spray upward for overhead areas, such as suitable ceiling applications. Check product suitability and the exact fitting instructions before use.
How do I work out the quantity for my project?
For quantity planning, multiply the measured area by thickness in inches, divide by the manufacturer-reported 20 board feet per can, and round up. Actual yield varies with conditions and technique. Read the coverage guide or ask for product information.
What happens if an item arrives damaged?
Contact DealMart with your order number, a description and photos where it is safe to take them. Transport damage and product defects can be reviewed for replacement. Do not send pressurized aerosols back. Review the refund and replacement policy for the full process and refund timing.
Can I place an order online now?
Online checkout is not available yet. You can compare the kit contents and ask about a pack. A product inquiry does not place an order or reserve stock.
What to check before buying
- Total number of cans in the selected pack.
- Included accessories and exact product identity.
- Intended applications and any use restrictions.
- Product-specific instructions and safety documents.
Pack size is a quantity
The number of cans does not establish coverage. Check the documentation for your exact product, application conditions and required thickness.
Find product documents →