Help close the gaps.
Filling suitable gaps can help reduce paths for unwanted air movement. Plan the application around your surface and the product instructions.
Illustrative comparison, not a measured air-leakage or energy-saving test.
12 CANS / 1 CASE
Product photos illustrate the kit. Current accessory quantities are listed below.
Polyurethane
Spray Foam Kit
Choose the quantity for your project. Every case contains 12 foam cans and the accessory set listed below.
—USD
Pack size12 cans / 1 case
Checking kit availability...
First order? Take $10 off. Use code WELCOME10 at checkout.
Sign in to claim the offer →Sign in before checkout. For customers with no previous orders. $10 off the order, once per customer. Cannot be combined with other discounts. Eligibility is checked at checkout.
Free standard shipping within the contiguous 48 U.S. states.
Alaska, Hawaii & U.S. territories: contact customer service for shipping. Online checkout is unavailable for these destinations.
Included in each 12-can case
- 12 polyurethane foam cans
- 1 applicator gun and 1 cleaner
- 6 red nozzle pairs: 6 straight tips + 6 angled 45° tips
- 1 coverall, 1 protective eyewear item and 1 pair of gloves
The 24, 36 and 48-can packs include 2, 3 and 4 cases respectively.
Carton size & weight
Each case: 13.8 × 9.4 × 14.8 inches (L × W × H), approximately 28.7 lb. Larger packs contain multiple cartons of this size.
Delivery & order support
Orders ship from Chino, California. In-stock orders usually dispatch within 3 days. We dispatch Monday through Saturday; no dispatch on Sundays. Transit to eligible mainland addresses normally takes up to 7 days after dispatch, depending on destination and carrier timing. These are estimates, not guaranteed delivery dates. Pressurized aerosol products are not accepted for physical return. Shipping damage or product issues may qualify for replacement after review.
Read the return and refund policy
Foam for the project.
Cleaner for the tools.
A gun-applied polyurethane foam kit, with the accessories to help you prepare for the job. Choose one case or stock up with a larger pack.
The blue can contains polyurethane foam. The silver can is a separate gun cleaner—keep each product's label and instructions handy.
- 12
- foam cans per case
- 2
- red nozzle types
- 4
- pack sizes
Inside your 12-can kit.
1 case. Foam, applicator and accessories for the pack you selected.
- Polyurethane foam cans
- 12
- Applicator gun
- 1
- Gun cleaner can
- 1
- Red nozzle pairs One straight tip + one 45° tip in every pair
- 6 pairs
- Protective coverall
- 1
- Protective eyewear
- 1
- Gloves
- 1 pair
Check the product instructions for any additional equipment or protection your job requires.
Each carton: 13.8 × 9.4 × 14.8 in (L × W × H), approximately 28.7 lb. Larger packs contain multiple cartons of this size.
Four materials.
More possibilities.
Use DealMart on properly prepared wood, metal, concrete and drywall. Check the condition of the surface before you start.
- WoodIncluding wood panels
- MetalCheck coatings and finishes
- ConcreteRemove loose surface material
- DrywallCheck the face and condition
Remove loose dust and oil. Test a small area before the full job, and follow the product label.
Explore the application guide
Pick your direction.
Build up in thin coats.
A straight tip for forward-facing work, plus a 45° angled tip for overhead areas. Both attach to the applicator gun.
Two tips in every pair.
Use the straight tip for forward-facing spray work and the 45° angled tip for overhead areas. Both fit the applicator gun.
6 pairs per 12-can case: 6 straight tips + 6 angled tips. Your 12-can pack includes 6 pairs.
See how to use the tips- 01 / PREPAREShake for at least 60 seconds.
Prepare the surface and assemble the applicator as directed.
- 02 / AIMWork from 12–18 inches away.
Use the straight tip or the 45° tip to suit the spray direction.
- 03 / BUILDApply thin coats.
For ceilings, wait 30–60 seconds before the second coat. The recommended 2 in is total thickness.
Plan for everyday comfort.
Consider insulation as part of the whole room. Foam thickness, installation and the surrounding wall or roof assembly all matter.
Performance depends on the complete assembly and installation. No specific noise-reduction or energy-saving percentage is promised.
Measure first.
Choose your pack.
Multiply the area in square feet by the planned thickness in inches. Divide by the manufacturer-reported yield of 20 board feet per can to estimate the can count.
YOUR SELECTED 12-CAN PACK120 sq ft
Estimated coverage at 2 in total thickness, before any allowance for loss.
Actual yield varies with conditions and technique. One board foot is 1 sq ft covered to a depth of 1 in.
Calculate your project quantityThickness & manufacturer-reported R-values
- 1 in
- R-4.12
- 2 in
- R-8.24
- 3 in
- R-12.36
- 4 in
- R-16.48
These values describe the foam, not a complete wall assembly. The manufacturer's recommended total thickness is 2 in; follow the application instructions for individual coats.
A clear plan.
From prep to spray.
Read the product instructions before you begin. Keep the foam and cleaner instructions together with the can labels.
- Prepare the surface. Clean it and dampen only under the specified conditions.
- Shake and assemble. Shake for at least 60 seconds; fit the can and gun as directed.
- Choose the spray direction. Use the straight tip for forward-facing work or nozzle 2 at 45° for ceilings.
- Build up gradually. Spray thin coats from 12–18 in. For ceilings, wait 30–60 seconds before the next coat.
The 30–60 second interval is a ceiling recoating instruction, not the full cure time. Follow the label for curing, ventilation, protection and cleanup.
